3 Series E46 318ti (N42) COMP
23 12 506
Replacing radial seal on input shaft
(S5D 200G/ 250G)
Special tools required:
•
23 0 490
•
23 2 430
•
23 2 460
Important!
After completion of work, change transmission oil.
Use only approved transmission oil.
Failure to comply with this instruction will result in serious
damage to the transmission.
Necessary preliminary tasks:
•
Remove guide tube
Note:
Two covered removal holes (1) are located on end face of
radial seal.
RA Replacing radial seal on input shaft (S5D 200G/ 250G)
BMW AG - TIS
12.02.2013 03:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
