3 Series E46 318ti (N42) COMP
Support transmission with special tools 00 2 030 / 24 5 301 /
24 5 305 .
Unfasten screws.
Tightening torque, 24 71 1AZ / 2AZ
.
Remove cross-member (1)
Unfasten screws.
Tightening torque, 26 11 1AZ .
Installation:
Replace self-locking nuts.
Grip propeller shaft.
Unscrew nuts.
Tightening torque, 26 11 6AZ .
Bend propeller shaft downwards at center bearing (1).
Detach propeller shaft from transmission output flange and tie
back to side on vehicle underbody.
RA Removing and installing automatic transmission (A5S 360/390R, N42/N46)
BMW AG - TIS
12.02.2013 03:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -