3 Series E46 318ti (N42) COMP
25 11 111
Replacing shift rod joint
Necessary preliminary tasks:
Unflange propeller shaft from transmission.
refer to 26 11 000 .
Detach locking clip.
Pull shift rod (1) out of shift rod joint (2) and remove shims (3).
Installation:
Grease shift rod pin (4).
Grease, refer to BMW Service Operating Fluids.
Large contact surface of shims (3) must rest on shift rod
joint (2).
Lever spring washer (1) out of groove and push a little towards
rear.
Press dowel pn (2) upwards/downwards out of shift rod joint and
remove shift rod joint.
Installation:
Grease ball of selector shaft.
Grease, refer to BMW Service Operating Fluids.
Replace spring washer (1).
RA Replacing shift rod joint
BMW AG - TIS
12.02.2013 04:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
