3 Series E46 318ti (N42) COMP
35 31 000
Removing and installing or replacing clutch
pedal
Remove trim panel for pedal assembly.
Refer to MG 51.
If applicable, remove clutch switch.
Disconnect return spring.
Press bolt ends (1) together and remove bolt.
Remove retainer (2) and detach clutch pedal from bearing
pedestal.
Installation:
Check bearing bushes (1) and replace if necessary.
Lightly grease bearing bushes (1),
Replace rubber grommet (2) if necessary.
RA Removing and installing or replacing clutch pedal
BMW AG - TIS
12.02.2013 07:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -