3 Series E46 318ti (N42) COMP
Drill out welding spots on connecting plate, side frame.
Remove connecting plate, side frame.
Drill out connection points, door pillar (A-pillar) on body, inside, in
area of door opening of door retaining strap.
At door hinge, top, cut open door pillar and open welding spot.
Caution!
Do not use a naked flame for heating!
Fire hazard!
Extract vapors and provide good ventilation.
RA Replacing front left door column (partial replacement) (front side panel removed
BMW AG - TIS
12.02.2013 08:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
