3 Series E46 318ti (N42) COMP
Make reinforcement plate from remaining metal sheet for
connection, bottom.
Width approx. 40 mm.
Fit cut cowl panel spare part.
Clean connection faces and coat reinforcement plates
(top/bottom) with zinc dust paint.
Drill holes for plug welding on cowl panel (top/bottom).
Clean connecting faces and coat with zinc dust paint.
Drill holes for plug welding on cowl panel spare part (top/bottom).
Clean connecting faces and coat with zinc dust paint.
RA Replacing left or right cowl panel (partial replacement in front of roof connect
BMW AG - TIS
12.02.2013 08:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
