3 Series E46 318ti (N42) COMP
Hinge bottom / top 0.5 mm.
Adjust gap measurements through appropriate number and/or thickness of shims.
Hand-tighten nuts on door hinges, top and bottom.
Adjust door according to prespecified gap measurements.
Check that adjoining body parts are flush in terms of height and
correct if necessary.
After adjustment, tighten hinge nuts and screws.
Note:
If necessary, adjust lock striker.
Detach cover (1) on door pillar.
Slacken screws (1) and (2), adjust lock striker and tighten
screws.
Note:
After slackening, lock striker should be positioned approx. 90
°
to
door frame inner edge (3) and be movable.
When the door is closed, the lock striker must not touch or scrape
against the door lock. Look out for scratches.
RA Adjusting left or right front door
BMW AG - TIS
12.02.2013 08:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
