3 Series E46 318ti (N42) COMP
51 12 801
Replacing holder for bumper at rear left or
right (compact)
Necessary preliminary tasks:
·
Remove rear bumper.
·
Remove rear trim.
Open cable tie (1) and remove. Remove cable.
Release screws (2) on wheel arch.
Take off holder.
Installation:
Push trim holder (1) over pin of side holder (2).
Release clip (1).
Release screw (2) in wheel arch.
Release screws (3).
Take off holder.
RA Replacing holder for bumper at rear left or right (compact)
BMW AG - TIS
12.02.2013 08:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
