3 Series E46 318ti (N42) COMP
51 12 001
Replacing rear bumper
Necessary preliminary tasks:
•
Remove complete rear bumper.
•
Remove rubbing strip for bumper at rear center.
Release expansion rivets (1) and screws (2) and remove center
bumper section (3) (bracket).
Replacing bumper trim only:
Unclip cover for tow lug at opening (1).
Unhook retaining strap (2).
If necessary, remove PDC.
Assembly position
RA Replacing rear bumper
BMW AG - TIS
12.02.2013 08:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
