3 Series E46 318ti (N42) COMP
Important!
When working with adhesive cleaners in enclosed rooms:
Ensure room is well ventilated.
Adhesive areas must be dry and free of dust and grease.
After cleaning, do not touch the adhesive areas with bare
hands (leakage).
If necessary, clean the specified adhesive area with adhesive
cleaner (sourcing reference: BMW Parts Service).
Air drying time: 1 minute
Secure leads (1) and (2) with 6 mm dia. butylene tape (3)
(sourcing reference: BMW Parts Service) and with cable
clamp (4).
Lay 6 mm dia. butylene tape (sourcing reference: BMW Parts
Service) in specified adhesive area.
Heat butylene tape (hot air blower) and press down firmly on
sound insulation all round.
Contact pressure with hand roller: approx. 30 N/cm
2
Manual contact pressure: approx. 10 N/cm
2
Note:
Firm thumb pressure has approx. 50 N/cm
2
RA Removing and installing/replacing sound insulation in left or right front door (
BMW AG - TIS
12.02.2013 09:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
