3 Series E46 318ti (N42) COMP
Left side:
Note:
The illustrations show the version with navigation system and
telephone. The standard version is of the same design as the right
side, which is described at the end.
Release expansion rivet (1).
Pull out luggage compartment wheel arch trim (2) towards
bottom/inside from mount (6) and seatbelt finisher strip (7).
Version with 12 V socket (3):
Disconnect plug connection for socket (3).
Replacement only:
Turn turn-lock fastener (5) and pull out flap.
Installation:
Make sure mucket (4) is correctly seated.
Installation:
Retaining washers (1) must be correctly seated on fastener (2) of
luggage compartment wheel arch trim (3).
Installation:
Guides (1) of flap (2) must not be damaged.
Washer (3) must be correctly seated on fastener (4).
RA Removing and installing/replacing left (or right) luggage compartment wheel arch
BMW AG - TIS
12.02.2013 10:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -