3 Series E46 318ti (N42) COMP
Using a pneumatic saw (1),
cut through drive shaft (2) from rear.
Remove drive shaft (1) from gear (2).
Release screw (1) and remove gear (2).
Over rest of drive shaft (1),
adjust front seat,
release screws on floor panel
and remove front seat.
Note:
If gear (4) is faulty,
detach cover (2),
release screws (3),
and remove gear (4).
RA Additional work (normal/ electric) with defective drive for longitudinal adjustm
BMW AG - TIS
12.02.2013 10:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
