3 Series E46 318ti (N42) COMP
52 14 034
Removing and installing/replacing release
mechanism on front left or right seat
Remove release lever on front seat.
Remove rear panel on front seat.
Remove cover on left and right:
-
Unclip catch (1) towards rear
-
Unclip catch (2) towards front
-
Lift out cover of guide (3) towards bottom and side
Installation:
Catches (1, 2) and guide (3) of cover must not be damaged.
Unclip cable on left and right:
-
Press together catches (1) and detach lug towards outside
-
Unclip catch (2) of cable mount towards top and remove
towards outside
Installation:
Catches (1) must not be damaged.
After installation, they must always point outwards (away from
seat).
Installation:
Catch (1) and guide bearing (2) must not be damaged.
RA Removing and installing/replacing release mechanism on front left or right seat
BMW AG - TIS
12.02.2013 10:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
