3 Series E46 320Cd (M47TU) CONVER
11 61 050
Removing and installing intake air manifold
(M47TU)
Special tools required:
•
00 2 190
Remove microfilter.
Open cable duct on lower section of microfilter housing (2) and
feed out cable(s).
Release screws (1), remove lower section of microfilter
housing (2) and heater bulkhead underneath.
Remove expansion rivets.
Release intake hood in direction of arrow and remove in opposite
direction together with intake snorkel.
Unfasten screws.
Lift off acoustic cover.
RA Removing and installing intake air manifold (M47TU)
BMW AG - TIS
12.02.2013 03:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
