3 Series E46 320Cd (M47TU) CONVER
Remove sealing cover (1) from heat shield.
Pull out seal plug.
Installation:
Retaining clip (1) on sealing cover (2) must be inserted at
heat shield.
Installation:
Replaced damaged seal plugs.
Insert three seal plugs (1) from above.
Release screws (1).
Tightening torque 11 65 1AZ .
Installation:
Apply a thin coat of copper paste (CRC) to screw (1) threads,
RA Removing and installing, sealing/replacing exhaust manifold (M47TU / M47T2)
BMW AG - TIS
12.02.2013 04:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
