3 Series E46 320Cd (M47TU) CONVER
11 74 508
Replacing pressure transducer for
turbocharger (M47TU)
Turn off ignition.
Caution!
If the charge air hoses are not fitted without grease and dry,
this will result in supercharger failure.
Fit charge air hoses without grease and dry.
Remove expansion rivets.
Release intake hood in direction of arrow and remove in opposite
direction together with intake snorkel.
Disconnect plug.
Detach vacuum line to vacuum reservoir (3).
Detach vacuum line to turbocharger pressure unit.
Slacken covered nut (1).
Release nut (2).
Lift out pressure transducer for turbocharger towards top.
Read out fault memory of DDE control unit.
Check stored fault messages.
Rectify faults and clear fault memory.
RA Replacing pressure transducer for turbocharger (M47TU)
BMW AG - TIS
12.02.2013 04:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
