3 Series E46 320Cd (M47TU) CONVER
Release positive lead from retaining clip.
Release positive leads from terminal to alternator (1) and from
alternator to starter motor (2).
Note:
Line (3) leads to auxiliary heater.
Installation:
Tightening torque, 12 31 1AZ.
Disconnect battery negative lead (1) to alternator at solenoid
switch of starter motor.
Tightening torque, 12 41 4AZ.
Note:
Read out fault memory of DDE control unit.
Check stored fault messages.
Rectify faults.
Then clear fault memory.
RA Replacing battery positive lead (M47TU)
BMW AG - TIS
12.02.2013 04:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
