3 Series E46 320Cd (M47TU) CONVER
12 51 001
Replacing wiring harness section for engine
(M47TU)
Read out fault memory of DDE control unit. Switch off
ignition.
Observe instructions for disconnecting and connecting
battery.
Refer to general information in MG 12 .
Disconnect and cover battery negative lead.
Remove intake air manifold.
Remove engine underguard.
Disconnect plug connections on pressure transducer for variable
turbine geometry (EPPT for VNT).
Disconnect plug connection on A/C compressor.
Disconnect plug connections for air-mass flow sensor (1),
camshaft sensor (2), rail pressure sensor (3) and injectors (4).
Disconnect plug connection for charge air temperature sensor.
RA Replacing wiring harness section for engine (M47TU)
BMW AG - TIS
12.02.2013 04:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
