3 Series E46 320Cd (M47TU) CONVER
Disconnect plug connection (1) on oil level switch (2).
Release cable retaining points.
Detach cable from transmission.
Note:
Illustration similar.
Release screws (1).
Remove cover from electronics box.
Detach seal (1).
Detach bracket (2).
Detach profile seals (3) with wiring harnesses.
Release panel (4).
Detach profile seal (5) with wiring harness.
Disconnect plug connection on DDE 5 control unit (1).
Disconnect plug connections on transmission control unit: module
4 (2) and module 2 (6).
Detach relay for reversing light (RFL) (3).
Detach relay for "Digital Diesel Electronics" (DDE) (4).
Detach engine fuse with socket (5) from equipment carrier.
Release engine plugs (7, 8).
RA Replacing wiring harness section for engine (M47TU)
BMW AG - TIS
12.02.2013 04:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -