3 Series E46 320Cd (M47TU) CONVER
51 15 390
Removing and installing/replacing protective
strip in side panel, rear left or right (Coupé)
Caution!
Rear clip (1) is attached to protective strip (2) and cannot be
replaced.
Unclip rear clip (1) with two special tools 00 9 317 (trim panel
wedge).
Then unclip clips (3) and remove protective strip (2).
Installation:
Always replace front grommet (1) (leaks).
If necessary, lever out clips or rubber grommet (2) from side
panel.
Installation:
If necessary, replace faulty rubber grommets (1) and clips (2).
Attach clips with rubber grommet to protective strip and align.
Replace protective strip (4) if clip (3) is damaged.
Clip protective strip into door.
RA Removing and installing/replacing protective strip in side panel, rear left or r
BMW AG - TIS
12.02.2013 09:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -