3 Series E46 320Cd (M47TU) CONVER
51 31 257
Replacing seal for hard top rear window
Important!
Carefully unwind rubber frame (1) (rear window breakage).
Note:
Tear-off lip (2) may be stuck to adhesive (3).
When rubber frame (1) is removed, tear-off lip (2) can tear off
and remain in vehicle.
4
Rear window
Installation:
Replacement of seal without rear window removal:
Detach tear-off lip (2) from rubber frame (1).
If adhesive has managed to get onto bridge (3), this area must be
cut out partially.
To facilitate installation, coat rubber frame (1) and hard top cutout
with water.
Replacement of seal with removed or new rear window:
Detach tear-off lip (2) from rubber frame (1).
RA Replacing seal for hard top rear window
BMW AG - TIS
12.02.2013 10:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
