3 Series E46 320Cd (M47TU) CONVER
Note:
The work for "Removing/replacing door lock (51 21 090)" ends
here.
Release nuts (1).
Feed power window unit (2) with drive mechanism (3)
completely out of door.
Installation:
Replace self-locking nuts.
Tightening torque 51 33 2AZ.
Installation:
Check rear support for door window glass:
Rubber ring (1) must not be brittle, replace if necessary.
Cover (2) must not be folded back.
If cover (2) is folded back, adjusting cam (3) is outside guide.
Installation:
If necessary, open cover.
Lay adjusting cam (1) in guide (2) of support (3).
Fit cover.
RA Removing and installing / replacing power window unit in left or right front doo
BMW AG - TIS
12.02.2013 10:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
