3 Series E46 320Cd (M47TU) CONVER
65 12 070
Removing and installing/replacing amplifier
(Convertible)
Remove lower section of side trim on left.
If necessary, remove convertible top module.
Loosen screws (1).
Withdraw holder (2) with amplifier a little.
Disconnect plug connection behind.
Remove holder (2) with amplifier.
Replacement:
Remove holder (2) from amplifier.
Installation:
Ensure correct cable routing.
RA Removing and installing/replacing amplifier (Convertible)
BMW AG - TIS
12.02.2013 14:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
