3 Series E46 320Ci (M52TU) COUPE
Tighten the screws (1 and 2).
Release nuts on engine mount on left and right.
Raise engine with special tool 00 0 200 approx. 5 mm.
Remove exhaust system.
Note:
Vehicles with front end reinforcement:
Remove front end reinforcement.
Remove right engine support arm with engine mount.
Note:
The oxygen sensors are in danger of being damaged when the
exhaust manifolds are removed and installed.
If necessary, remove control sensors.
RA Removing and installing both exhaust manifolds with catalytic converters (M52TU
BMW AG - TIS
12.02.2013 12:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -