3 Series E46 320Ci (M52TU) COUPE
24 52 010
Replacing radial seal on manual shift valve
shaft (A5S 325Z)
Note:
After completing work, check transmission oil level and top
up if necessary.
Move selector lever to "P" setting.
Brace clamping bush (1) and loosen nut (2).
Installation:
Adjust selector lever,
refer to 24 00 017.
Brace cable on hex head (1) and loosen nut (2).
Remove cable from bracket.
Installation:
Tightening Torque,
refer to Technical Data 25 16 1AZ.
RA Replacing radial seal on manual shift valve shaft (A5S 325Z)
BMW AG - TIS
12.02.2013 15:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -