bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing _ Replacing Shift Tower (Steptronic)|Page 1299 > < 2 RA Removing And Installing _ Replacing Shift Tower (Steptronic)|Page 1297
Page 4
background image

Pull support member (1) slightly out of center console.

Depending on equipment, press fitted switches (2) forwards out of
support member (1) and disconnect.

On rear side of support member (1), disconnect power cable from
cigarette lighter.

Remove support member (1).

Detach cable plug (1) from fixture and disconnect.

Release catches and remove protective cap (1) from shift tower.

Release screw (1) and remove interlock cable (2) from interlock
lever (3).

Installation:

Adjust interlock cable and check interlock operation.

RA  Removing and installing / replacing shift tower (Steptronic)

BMW AG - TIS

12.02.2013  15:47

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

2 RA Removing And Installing _ Replacing Shift Tower (Steptronic)|Page 1299 > < 2 RA Removing And Installing _ Replacing Shift Tower (Steptronic)|Page 1297