3 Series E46 320Ci (M54) COUPE
Unscrew screw.
Installation:
Tightening torque,
refer to Technical Data 72 11 1AZ
Remove automatic reels.
Installation:
Coding (1) of automatic reels must be situated in opening (2)
of body.
Retaining screw (3) locates automatic reel in position.
Open cable strap for plug of pyrotechnical belt tensioner (2).
Detach end cap and plug for pyrotechnical belt tensioner (1).
Release screw (3) and remove pyrotechnical belt tensioner.
Installation:
Replace microencapsulated screw.
Tightening torque for screw (3),
refer to Technical Data 72 11 1AZ
Replace cable strap for plug of pyrotechnical belt tensioner.
Plug of pyrotechnical belt tensioner must not be under strain.
Installation:
Make sure that holder for cable of pyrotechnical belt
tensioner/seatbelt buckle contact is in correct position.
RA Removing and installing/replacing front seat belt
BMW AG - TIS
13.02.2013 02:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -