3 Series E46 320d (M47) SAL
Installation:
Check dowel sleeve for damage and correct installation
position.
Note:
Position of dowel sleeve (1) in dual-mass flywheel is
identified by two notches next to associated bolt hole.
Installation:
Clean thread and install new micro-encapsulated screws.
Tightening torque, 11 22 1AZ .
RA Removing and installing or replacing flywheel (M47 / M47TU)
BMW AG - TIS
12.02.2013 12:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
