3 Series E46 320d (M47) SAL
11 31 091
Removing and installing/replacing hydraulic
chain tensioner (M47)
Remove timing case cover at bottom,
refer to 11 14 110.
Press in clamping piston at bottom and lock with special
tool 11 3 340 (alignment pin).
Unscrew and remove chain tensioner.
Warning!
Tensioner pistons are under spring pressure.
When plug pins are removed, there is a risk of injury.
RA Removing and installing/replacing hydraulic chain tensioner (M47)
BMW AG - TIS
12.02.2013 13:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
