3 Series E46 320d (M47) SAL
11 42 020
Removing and installing/sealing or replacing
complete main flow oil filter (M47)
Special tools required:
•
00 0 200
•
00 0 201
•
00 0 202
•
00 0 204
•
00 0 208
Warning!
Danger of injury!
The main flow oil filter and the engine support arm form a
single component.
Before removing main flow oil filter:
Support engine against falling with special tool 00 0 200 .
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Note:
Screw (1) is not visible.
Release screws.
Remove acoustic cover at front.
RA Removing and installing/sealing or replacing complete main flow oil filter (M47)
BMW AG - TIS
12.02.2013 13:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -