3 Series E46 320d (M47) SAL
11 62 000
Removing and installing, sealing/replacing
exhaust manifold (M47)
Remove microfilter.
Open cable duct on lower section of microfilter housing (2) and
feed out cable(s).
Release screws (1) and remove lower section of microfilter
housing (2).
Release expansion rivets (1).
Slide covers approx. 2 cm towards rear and lift out.
Note:
Screw (1) not visible.
Unfasten screws.
Remove acoustic cover at front.
Remove intake neck.
RA Removing and installing, sealing/replacing exhaust manifold (M47)
BMW AG - TIS
12.02.2013 13:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
