3 Series E46 320d (M47) SAL
Press accelerator pedal down to full-throttle stop.
Unhook cable of pedal travel sensor (1) from accelerator pedal
(2).
Release screws (1).
Installation:
Nut of upper screw is accessible through opening in bracket
for steering column.
Place nut of upper screw in an offset ring wrench and secure
nut against dropping out. Join nut with box wrench to securing
eye and grip firmly. The upper screw can then be tightened.
Turn pedal travel sensor (1) and feed past securing eyes of pedal
block.
Feed out travel value sensor between steering column and brake
pedal.
Layout of pedal travel sensor:
1.
Cable pulley
2.
Securing nut
3.
Cable to accelerator pedal
RA Removing and installing / replacing pedal travel sensor (M47 / M57)
BMW AG - TIS
12.02.2013 13:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -