3 Series E46 320d (M47) SAL
Loosen screws (1).
Intercooler (2) remains in car.
Unlock and disconnect plug connection (1) at needle motion
sensor.
Pull retaining clips (1/2) towards top and disconnect coolant hose
from expansion tank/radiator.
Installation:
Check O-rings. Do not under any circumstances coat O-rings
with antiseize agent.
Pull retaining clips (1) upwards and disconnect coolant hose from
expansion tank.
Installation:
Check O-rings.
Do not under any circumstances coat O-rings with antiseize
agent.
RA Removing and installing radiator (M47)
BMW AG - TIS
12.02.2013 14:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
