3 Series E46 320d (M47) SAL
18 00 018
Removing and installing rear exhaust system
(M47, M47TU without primary catalytic
converter)
Warning!
Scalding hazard!
Only perform these tasks on an engine that has cooled down.
Release hexagon nuts (1).
Installation:
Replace self-locking nuts.
Coat thread with copper paste, refer to BMW Parts Service.
Support exhaust system with lifting equipment.
Release screws (1/2) and remove reinforcement plates (3/4).
RA Removing and installing rear exhaust system (M47, M47TU without primary catalyti
BMW AG - TIS
12.02.2013 14:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -