3 Series E46 320d (M47) SAL
25 11 000
Removing and installing shift lever
Special tools required:
•
25 1 120
Necessary preliminary tasks:
GS6-37BZ/DZ and 53BZ/DZ transmissions only:
•
Remove exhaust system (M54/ M57/ M57TU).
•
Remove heat shield (M54/ M57/ M57TU).
•
Remove transmission cross-member (M47TU).
Note:
Do not twist knob during removal as this would cause the
turning lock in the knob to shear off.
Tug firmly to remove knob.
Installation:
Fit knob on shift lever, align and press on until it snaps
noticeably into place.
Installation:
Slide gaiter (1) downwards until groove (2) is completely
exposed.
RA Removing and installing shift lever
BMW AG - TIS
12.02.2013 15:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
