3 Series E46 320d (M47) SAL
51 11 170
Replacing body molding for left or right
bumper
Unclip rubbing strip (1) with special tool 00 9 321 (folding leg)
first at front, then at side,
pull out at side from bumper (2)
and remove.
Installation:
Push rubbing strip (2) at side into bumper.
Slide guide (1) of rubbing strip (2)
into support (3) of base (4)
and clip in rest.
RA Replacing body molding for left or right bumper
BMW AG - TIS
12.02.2013 20:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -