3 Series E46 320d (M47) SAL
M47TU:
Remove air funnel.
Unscrew nut (1).
Detach vacuum hose (2) in direction of arrow.
Lift off vacuum tank (3) and place to one side.
Note:
For purposes of clarity, illustration shows removed charge
pressure pipe.
Loosen screws (1).
Remove lines (2) and (3).
Installation:
Replace sealing rings.
Observe tightening torque, 64 52 1AZ
.
Disconnect plug connection (4) in direction of arrow.
All:
Note:
Secure A/C compressor (2) against falling out.
Release screws (1) and remove A/C compressor (2).
RA Removing and installing/replacing complete A/C compressor (M47, M47TU)
BMW AG - TIS
13.02.2013 01:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -