3 Series E46 320d (M47) TOUR
Install camshafts.
The bearing caps of the inlet camshaft are marked E 1 ... E 5
from the exhaust side.
The bearing caps of the exhaust camshaft are marked
A 1 ... A 5 from the exhaust side.
Fit bearing caps.
Insert all screws (1) and initially tighten so that they are free of
play.
Tighten down camshaft bearing caps in 1/2 turn increments evenly
from inside to outside.
Tightening torque,
refer to Technical Data 11 31 1AZ.
Note:
Rotate camshafts at hexagon drive.
Rotate camshafts until cam tips of inlet and exhaust camshafts
point to each other.
RA Replacing camshafts (M47)
BMW AG - TIS
12.02.2013 13:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -