3 Series E46 320d (M47) TOUR
Remove cover.
Release retaining screws of torque converter (3 x) with special
tool 24 1 110 .
Tightening torque, 24 40 1AZ.
Installation:
Use only original screws.
Protect torque converter from slipping out. To do so, insert special
tool 24 4 131 / 24 4 135 in opening in transmission housing.
Clamp torque converter.
Release screws.
Tightening torque, 24 00 1AZ.
Pull off transmission from engine towards rear and lower it.
RA Removing and installing automatic transmission (A5S 360R / 390R, M47/ M57)
BMW AG - TIS
12.02.2013 15:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
