3 Series E46 320d (M47) TOUR
Using a hydraulic press, force center mount (1) off propeller shaft.
Force new center mount (1) onto propeller shaft (3). Collar (2)
must point to propeller shaft (3).
Drive center mount (1) firmly home with special tool 23 1 160.
Observe marking and force universal joint (1) of rear propeller
shaft onto middle propeller shaft (2).
Install screw (3) with Loctite 273 locking varnish.
Tightening Torque,
refer to Technical Data 26 11 5AZ.
RA Replacing both complete propeller shaft center mounts (three-part propeller shaf
BMW AG - TIS
12.02.2013 16:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -