3 Series E46 320d (M47TU) SAL
Remove coolant hose between thermostat, EGR cooler and
radiator.
Release coolant hose on distributor pipe at bottom.
Place hose to one side.
Release coolant hoses on connection to engine block.
Place tube to auxiliary heater to one side.
Release heater connection on bulkhead.
Installation:
Quick-release couplings of coolant hoses must snap audibly
into place.
RA Removing and installing engine (M47TU)
BMW AG - TIS
12.02.2013 12:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -