3 Series E46 320d (M47TU) SAL
Disconnect ground cable from terminal (1).
Release rubber grommets affected.
Remove "wiring harness section for engine" from electronics box
and place on engine.
Fit engine to special tool 11 0 070 .
Unscrew earth strap from carrier on right-hand side.
Unfasten top and loosen bottom right and left engine mounts.
RA Removing and installing engine (M47TU)
BMW AG - TIS
12.02.2013 12:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -