3 Series E46 320d (M47TU) SAL
11 14 110
Removing and installing, sealing/replacing
timing case cover at bottom (M47TU / M47T2)
Special tools required:
•
00 0 200
•
11 3 340
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Remove oil sump.
Note:
After removing oil sump, reinstall front axle support
provisionally and remove special tool 00 0 200 .
Remove cylinder head.
Remove vibration damper.
Remove radial seal.
Note:
Install new radial seal only after installing timing case cover.
RA Removing and installing, sealing/replacing timing case cover at bottom (M47TU /
BMW AG - TIS
12.02.2013 13:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -