3 Series E46 320d (M47TU) SAL
Important!
Piston and piston bolts are paired and must not be fitted
individually.
Install snap ring so that opening is opposite recess.
Important!
Re-install piston, conrod and bearing shells back in the same
position and in the same installation location.
Connecting rods and bearing covers are designated with the
same pair number: do not mix them.
Insert special tool 11 6 330 in conrod.
Lightly coat pistons and piston rings with oil.
Align contact points on piston rings (offset at approx. 120
°
, but do
not arrange over piston pin lug).
Press together piston rings with special tool 11 2 260 .
RA Removing and installing or replacing all pistons (M47TU / M47T2)
BMW AG - TIS
12.02.2013 13:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -