3 Series E46 320d (M47TU) SAL
Crank engine in direction of rotation up to TDC position.
Caution!
Do not crank engine back.
Secure crankshaft with special tool 11 2 300 in TDC position.
Place special tool 11 6 320 on inlet camshaft.
Note:
Special tool 11 6 320 must rest without a gap on cylinder
head.
Repeat the work operation under the same requirements on the
exhaust camshaft.
Remove special tool for securing and checking camshaft
positions.
Remove special tool 11 2 300 .
Install plug in special tool bore.
Assemble engine.
RA Replacing camshafts (M47TU)
BMW AG - TIS
12.02.2013 13:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -