3 Series E46 320d (M47TU) SAL
Release screws.
Lift off acoustic cover.
Remove heater bulkhead.
Unfasten screws.
Remove rear acoustic cover.
Remove lower section of microfilter housing.
Loosen screws (1).
Remove shield.
Remove oil dipstick.
Release oil dipstick guide tube on manifold.
Remove guide tube.
Release plug to glow control unit.
Remove glow control unit.
RA Removing and installing/replacing starter motor (M47TU)
BMW AG - TIS
12.02.2013 13:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -