3 Series E46 320d (M47TU) SAL
13 53 315
Removing and installing/replacing all
injectors in fuel injection system (M47TU,
M47T2)
Special tools required:
•
13 5 020
•
13 6 100
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
Important!
It is essential to adhere to conditions of absolute cleanliness
when working on the fuel system.
•
Do not allow any dirt particles or foreign bodies to get into the
system
•
Use only fluff-free cloths
•
Remove all traces of dirt before removing pipes or individual
components
•
Seal all fuel system openings with protective caps
RA Removing and installing/replacing all injectors in fuel injection system (M47TU,
BMW AG - TIS
12.02.2013 14:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -