3 Series E46 320d (M47TU) SAL
If necessary, remove cable for Interlock.
Installation:
Lock (1) must snap into place.
Unlock connector and remove.
Detach wiring harness from cable duct.
Release shear screw (1) (e.g. mill off or drill out).
Release screw (2).
Installation:
Tighten down new shear screw until screw head shears off.
Important!
New feature of model series: shear screw (1) is omitted and
can thus be replaced by a normal M8 screw!
Unfasten screws.
Remove steering column.
RA Removing and installing steering column
BMW AG - TIS
12.02.2013 17:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
