3 Series E46 320d (M47TU) SAL
32 41 061
Replacing power steering vane pump
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off pipe connections with plugs.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
Necessary preliminary tasks:
•
Check function of vane pump
•
Remove vane pump
Release screws (1).
Tightening torque 32 41 14AZ
.
Remove belt pulley (2).
Installation:
Lettering on belt pulley (2) must point forwards.
RA Replacing power steering vane pump
BMW AG - TIS
12.02.2013 17:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -