3 Series E46 320d (M47TU) SAL
51 21 170
Removing and installing/replacing outside
handle on left or right front door (from 09/00)
Special tools required:
•
00 9 322
Note:
The work is identical for all E46 models from year of
manufacture 09/2000.
The components are simply adapted to the different door
geometries.
Driver's side:
Remove lock cylinder completely from front door.
Passenger side:
Remove cover on outside handle.
Removal:
Moving lock actuator to "installation position":
Pull outside handle (1) outwards/upwards and secure with special
tool 00 9 322 .
In this position, tighten down screw (2) counterclockwise (left-hand
thread).
Lock actuator is now in "installation position".
Installation:
Tightening torque, 51 21 5AZ.
Remove special tool 00 9 322 .
Note:
Turn driver's and passenger sides in same direction.
3
Screw for lock cylinder
RA Removing and installing/replacing outside handle on left or right front door (fr
BMW AG - TIS
12.02.2013 21:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -